D国際会議発表

D01SUCIU, O.BONNEAU, J.FRENE, D.BRUN-PICARD, Analytical Investigation of an Active-Control Squeeze Film Damper, 7th International Conference on Tribology, ROTRIB96, Bucharest, Romania, 1996.9, Vol. 18, pp. 16-26

D02SUCIU, M.D.PASCOVICI, Theoretical Study of a Squeeze Film Damper and Vibrations Generator. Infinite Width Rayleigh Step Case, 9th International Conference on EHD Lubrication and Traction, Suceava, Romania, 1998.6, Vol. 1, pp. 1-10

D03SUCIU, Systèmes de controle des vibrations à film fluide, Module dEnseignement Francophone - Conception Integrée: Methodes et Outils, Bucharest, Romania, 1998.9, Vol. 1, pp. 97-109

D04SUCIU, O.BONNEAU, D.BRUN-PICARD, J.FRENE, M.D.PASCOVICI, Study of a Squeeze Film Damper and Vibration Generator. Part I: Theoretical Investigations, ASME/STLE International Tribology Conference, Toronto, Canada, 1998.10, poster

D05SUCIU, O.BONNEAU, D.BRUN-PICARD, J.FRENE, M.D.PASCOVICI, Study of a Squeeze Film Damper and Vibration Generator. Part II: Experimental Investigations, ASME/STLE International Tribology Conference, Toronto, Canada, 1998.10, poster

D06SUCIU, Analysis of Squeeze Film Between Rough Rectangular Surfaces, Proceedings of the BalkanTrib99, 3rd International Tribology Conference, Sinaia, Romania, 1999.6, pp. 403-410

D07SUCIU, M.D.PASCOVICI, T.IWATSUBO, Study of a Torsional Fluid Film Vibrator, Proceedings of the International Tribology Conference, Nagasaki, Japan, 2000.11, Vol. 3, pp. 1663-1668

D08T.IWATSUBO, SUCIU, S.DEKI, Theoretical Investigation of a Colloidal Damper, Proceedings of the Asia Pacific Vibration Conference, Hangzhou, China, 2001.11, Vol. II, pp. 407-411

D09SUCIU, Design of a Colloidal Damper, The Korean & Japanese Joint Seminar in Advanced Engineering, Busan, Korea, 2002.8, pp. 1-12

D10SUCIU, T.IWATSUBO, Experimental Investigation of a Double Colloidal Damper, Proceedings of the Asia Pacific Vibration Conference, Gold Coast, Australia, 2003.11, Vol. II, pp. 657-663

D11SUCIU, T.IWATSUBO, K.YAGUCHI, M.IKENAGA, Investigation of the Water Flow into a Mesoporous Matrix from Hydrophobized Silica Gel, Proceedings of the 5th Int. ASME Sym. on Comp. Tech. for Fluid, Thermal, Structural, Chemical Systems with Industrial Applications, San Diego, USA, 2004.7, Vol. 1, pp. 211-221

D12SUCIU, T.IWATSUBO, M.IKENAGA, K.YAGUCHI, Effect of the Structure of the Hydrophobized Mesoporous Silica Gel on the Colloidal Damper Hysteresis, International Conference on Noise and Vibration Engineering, Leuven, Belgium, 2004.9, Vol. 1, pp. 665-679

D13SUCIU, K.YAGUCHI, Theoretical Investigation of the Surface Roughness Effect on the Contact Angle Hysteresis which Occurs at the Water Adsorption/Desorption in/from a Hydrophobized Mesoporous Silica Gel Matrix, Proceedings of the European Materials Research Society, Symposium E: Hybrid Polymer System of Industrial Importance, Warsaw, Poland, 2005.9, p.116

D14SUCIU, K.YAGUCHI, Experimental Investigation of the Dynamic Contact Angle Hysteresis Past a Solid Surface from Hydrophobized Silica Gel, Proceedings of the European Materials Research Society, Symposium E: Hybrid Polymer System of Industrial Importance, Warsaw, Poland, 2005.9, p.122

D15SUCIU, K.YAGUCHI, T.IWATSUBO, M.IKENAGA, Adsorption/Desorption of Glycerin and Formamide Aqueous Solutions in/from a Nano-Porous Matrix from Hydrophobized Silica Gel, Proceedings of PACIFICHEM 2005, Symposium 164: Nano-porous Materials Synthesis and Applications, Hawaii, USA, 2005.12, p.TECH-99

D16SUCIU, K.YAGUCHI, Molecular Dynamics Simulation and Evaluation of the Contact Angle Hysteresis of Water Nano-Droplet on a Surface from Hydrophobized Silica Gel, Proceedings of PACIFICHEM 2005, Symposium 188: Characterization of Advanced Nano-porous Materials, Hawaii, USA, 2005.12, p.TECH-85

D17T.IWATSUBO, SUCIU, M.IKENAGA, K.YAGUCHI, Dynamic Characteristics of a New Damping Element Based on Surface Extension Principle in Nano Tube, Proceedings of the 1st International Conference on Vibro-Impact Systems, Loughborough, UK, 2006.7, CD-ROM, pp. 1-12

D18SUCIU, Experimental Investigation of the Dynamic Performances and Durability of a Colloidal Damper, Proceedings of the International Conference on Noise and Vibration Engineering (ISMA 2006), Leuven, Belgium, 2006.9, pp.1153-1164 (ISBN 90-73802-83-0)

D19SUCIU, S.TANI, K.YAGUCHI, On the Fatigue Fracture at Adsorption/Desorption of Water in/from Liquid-Repellent Nanoporous Silica, Proceedings of the Asian Conference on Mechanics of Functional Materials and Structures (ACMFMS 2008), Matsue, Japan, 2008.11, pp. 337-340

D20SUCIU, H.GOTO, Interconnection Between the Contact Angle (Adhesion) Hysteresis, Slippage on a Nanorough Solid Wall and Phononic Friction, Proceedings of the 2nd International Conference on Advanced Tribology (iCAT2008), Singapore, iCAT257, 2008.12, pp. 334-336

D21H.GOTO, SUCIU, Effect of Environmental Humidity on Wear Behavior of Aluminum-Silicon Alloy Impregnated Graphite Composite (ALGR-MMC) under Dry and Insufficiently Lubricated Sliding Conditions, Proceedings of the 2nd International Conference on Advanced Tribology (iCAT2008), Singapore, iCAT099, 2008.12, pp. 24-26

D22H.GOTO, SUCIU, M.SHIGE, Friction and Wear Properties of the Aluminum-Silicon Alloy Impregnated Graphite Composite (ALGR-MMC) under Insufficiently Lubricated Reciprocating Sliding Conditions,  Proceedings of the 4th World Tribology Congress (WTC2009), Kyoto, Japan, 2009.9, p. 394

D23SUCIU, H.GOTO, N.GOUYA, Molecular Dynamics Simulation of Wetting on Wavelike Nanorough Surfaces,  Proceedings of the 4th World Tribology Congress (WTC2009), Kyoto, Japan, 2009.9, p. 626

D24SUCIU, H.GOTO, H.ABIRU, Modeling and Simulation of a Screw-Worm Gear Mechanical Transmission to Achieve its Optimal Design under Imposed Constraints,  Proceedings of the 38th International Conference on Parallel Processing, Workshops (ICPPW2009), Vienna, Austria, 2009.9, pp. 160-165

D25SUCIU, Experimental Study on the Rear Suspension of a Mountain Bike Equipped with Colloidal Dampers, Proceedings of the 13th Asia-Pacific Vibration Conference (APVC2009), Christchurch, New Zealand, 2009.11, CD-ROM, pp. 1-10

D26SUCIU, Experimental Study on the Frontal Suspension of an Automobile Equipped with Colloidal Dampers, Proceedings of the 13th Asia-Pacific Vibration Conference (APVC2009), Christchurch, New Zealand, 2009.11, CD-ROM, pp. 1-10

D27SUCIU, Y.KIMURA, S.TANI, On the Generated Heat at Advancing/Receding of Water on Surface Engineered Nanoporous Silica, Proceedings of the 3rd International Conference on Multi-Functional Materials and Structures (MFMS2010), Jeonju, South Korea, 2010.9, Part 2, pp. 1003-1006

D28SUCIU, Investigations on a Smart Nano- Energy Absorption System, Proceedings of the 3rd International Conference on Multi-Functional Materials and Structures (MFMS2010), Jeonju, South Korea, 2010.9, Part 2, pp. 987-990

D29SUCIU, Ride-Comfort of an Automobile Equipped with Colloidal Dampers at its Frontal Suspensions, Proceedings of the ISMA2010 International Conference on Noise and Vibration Engineering (ISMA2010), Leuven, Belgium, 2010.9, CD-ROM, pp. 4233-4245

D30SUCIU, T.UCHIDA, Modeling and Simulation of the Fretting Hysteresis Loop, IEEE Computer Society, Proceedings of the 2010 International Conference on P2P, Parallel, Grid, Cloud and Internet Computing (3PGCIC2010), Workshop on Simulation and Modeling of Emergent Computational Systems (W-SMECS2010), Fukuoka, Japan, 2010.11, CD-ROM, pp. 560-564

D31SUCIU, Modeling and Simulation of the Wetting Process on Brushlike and Wavelike Nanorough Surfaces, IEEE Computer Society, Proceedings of the 2010 International Conference on P2P, Parallel, Grid, Cloud and Internet Computing (3PGCIC2010), Workshop on Simulation and Modeling of Emergent Computational Systems (W-SMECS2010), Fukuoka, Japan, 2010.11, CD-ROM, pp. 554-559

D32SUCIU, T.TOBIISHI, Investigations on the Optimum Design of a Colloidal Damper for Autovehicle Suspension, Proceedings of the 9th World Congress on Structural and Multidisciplinary Optimization, Shizuoka, Japan, 2011.6, CD-ROM, pp. 1-10

D33SUCIU, S.FUKUI, Y.KIMURA, Modeling and Simulation of a Shock Absorbing Shell for Ballistic Vests and Helmets to Achieve Optimal Protection, IEEE Computer Society, Proceedings of the 2011 International Conference on P2P, Parallel, Grid, Cloud and Internet Computing (3PGCIC2011), 4th International Workshop on Simulation and Modeling of Emergent Computational Systems (W-SMECS2011), Barcelona, Spain, 2011.10, CD-ROM, pp. 390-395 (ISBN 978-0-7695-4231-8)

D34SUCIU, T.TOBIISHI, R.MOURI, Modeling and Simulation of a Vehicle Suspension with Variable Damping and Elastic Properties versus the Excitation Frequency, IEEE Computer Society, Proceedings of the 2011 International Conference on P2P, Parallel, Grid, Cloud and Internet Computing (3PGCIC2011), 4th International Workshop on Simulation and Modeling of Emergent Computational Systems (W-SMECS2011), Barcelona, Spain, 2011.10, CD-ROM, pp. 402-407 (ISBN 978-0-7695-4231-8)

D35SUCIU, T.UCHIDA, H.GOTO, Influence of Environmental Humidity on the Fretting Properties of an Applicative Metallic Material under Grease Lubrication, Proceedings of the International Tribology Conference, Hiroshima, Japan, 2011.10-11, USB-Memory, pp. B2-05

D36SUCIU, S.FUKUI, Y.KIMURA, On the Impact Characteristics of Shock Absorbing Materials for Ballistic Armors, Proceedings of the 14th Asia-Pacific Vibration Conference (APVC2011), Hong Kong SAR, China, 2011.12, Vol. 4, pp. 1800-1808 (ISBN 978-962-367-734-9)

D37SUCIU, T.TOBIISHI, R.MOURI, On the Structural Simplification, Compact and Light Design of an Environmental Friendly Suspension for Autovehicle Use, Proceedings of the 14th Asia-Pacific Vibration Conference (APVC2011), Hong Kong SAR, China, 2011.12, Vol. 3, pp. 1134-1143 (ISBN 978-962-367-734-9)

D38SUCIU, S. FUKUI, Rheological Model for a Nanoporous-Elasto-Hydrodynamic Composite Material, Proceedings of the 8th International Forum on Advanced Materials and Technology (IFAMST2012), Fukuoka, Japan, 2012.8, USB-Memory, pp. 1-4, and Book of Abstracts, p. 82

D39SUCIU, S.BUMA, On the Structural Simplification, Compact and Light Design of a Vehicle Suspension, Achieved by Using a Colloidal Cylinder with a Dual Function of Absorber and Compression-Spring, Proceedings of the FISITA 2012 World Automotive Congress (FISITA2012), Beijing, China, 2012.11, DVD, Vol. 10: Chassis Systems and Integration Technology, pp. 21-32

(ISBN 978-7-900796-00-4, Springer)