C。審査付き論文
C01。SUCIU, 「Conformal Mapping for Airfoils with Spoiler」, Scientific Bulletin of Mech.
C02。ST.STANCIU,
SUCIU, 「Guidages de haute précision avec des billes recirculables」, Scientific Bulletin of Mech. Eng., 1992.5, Vol.
54, No. 1-2, pp. 223-232
C03。M.D.PASCOVICI, SUCIU,
「Analytical Investigation of a Narrow Compliant
Journal Bearing」, ACTA
TRIBOLOGICA, 1992.10, Vol. 1, No. 1, pp. 89-93
C04。ST.STANCIU, SUCIU, 「Sur le capacité portante
d'un guidage hydrostatique fermé」, Scientific Bulletin of Mech.
C05。ST.STANCIU, SUCIU, GH.GRADINARU, 「Functioning Parameters of
a Complex Hydrostatic Unit」, Studies and Researches
in Applied Mechanics, 1993.2, Tom. 52, No. 2, pp. 131-140
C06。ST.STANCIU, SUCIU, GH.GRADINARU, 「Active Control of a
Hydrostatic Complex Unit」, Studies and Researches
in Applied Mechanics, 1993.3, Tom. 52, No. 3, pp. 227-237
C07。ST.STANCIU, SUCIU, 「Study of a Complex Hydrostatic Guide-Way Unit」, Studies and Researches in Applied Mechanics, 1993.6, Tom. 52, No.
6, pp. 571-579
C08。M.D.PASCOVICI, SUCIU, 「A Complete Investigation of a Narrow Compliant Journal
Bearing」, Revue Roumaine des Sciences Techniques, Série de
Mécanique Appliquée, 1994.1, Tom. 39, No. 1, pp. 99-108
C09。ST.STANCIU, SUCIU, 「Calculus of the Complete Hydrostatic Journal Bearings」, Studies and Researches in Applied Mechanics, 1994.1, Tom. 53, No.
1, pp. 35-41
C10。ST.STANCIU, SUCIU, 「Study of a Hydrostatic
System Eccentrically Loaded」, Studies and
Researches in Applied Mechanics,
1994.2, Tom.53, No.2, pp. 153-160
C11。ST.STANCIU, SUCIU, C.PAUNA, 「Investigation of the
Geometry and Loading Influence Upon the Functioning Characteristics of a
Hydrostatic Journal Bearing」, Studies and
Researches in Applied Mechanics, 1994.3, Tom. 53, No. 3, pp. 243-263
C12。ST.STANCIU,
SUCIU, 「Investigation of a New “Mechanical Hand” Type System」, Revue Roumaine des
Sciences Techniques, Série de Mécanique Appliquée, 1994.5 , Tom. 39, No. 5, pp.
533-541
C13。ST.STANCIU, SUCIU, 「Study of the Performances of a
Ball-Screw」, Journal of
Machine Design, 1994.8 , Vol. 46, No. 5-6, pp. 24-26
C14。ST.STANCIU, SUCIU, 「Reliability Calculus of a Friction
Clutch」, Journal of
Machine Design, 1994.8, Vol. 46, No. 5-6, pp. 7-10
C15。SUCIU, 「Upon a Model of Compliance」, Journal of Machine Design, 1994.8, Vol.
46, No. 5-6, pp. 39-42
C16。SUCIU, I.PARAUSANU, 「Analytical Investigation
of an Misaligned Narrow Journal Bearing」, ACTA TRIBOLOGICA, 1994.10, Vol. 2, No. 2, pp.
115-122
C17。I.PARAUSANU, SUCIU,
「Determination
of the Angular Dynamic Coefficients for a Misaligned Narrow Journal Bearing」, Studies and Researches in Applied Mechanics, 1995.4, Tom. 54, No.
4, pp. 373-387
C18。SUCIU,
I.PARAUSANU, 「A Complete
Investigation of an Misaligned Narrow Journal Bearing」, Revue Roumaine des Sciences Techniques, Série de
Mécanique Appliquée, 1996.2, Tom. 41, No. 1-2, pp. 99-120
C19。SUCIU, 「Analogue Methods of Investigation for the Squeeze Film
Between Two Parallel Surfaces. Part I – Models」, Studies and Researches in Applied Mechanics, 1996.2, Tom. 55, No.
1-2, pp. 95-108
C20。SUCIU, 「Analogue Methods of Investigation for the Squeeze Film
Between Two Parallel Surfaces. Part II – Results」, Studies and Researches in Applied Mechanics, 1996.4, Tom. 55, No.
3-4, pp. 447-459
C21。ST.STANCIU,
C.PAUNA, SUCIU, 「A Complete Analysis of a
Hydrostatic Journal Bearing Using Restrictors with Non-Linear Characteristics
in the Supplying System」, Scientific Bulletin of Mech.
C22。SUCIU, ST.STANCIU, 「Analytical Investigation of a
Hydrostatic Axis-symmetric Convex-Surface Thrust Bearing」, Scientific Bulletin of Mech.
C23。SUCIU, O.BONNEAU, D.BRUN-PICARD, J.FRENE,
M.D.PASCOVICI, 「Study of a Novel Squeeze Film Damper and Vibration
Generator」, Trans. ASME,
Journal of Tribology, 2000.1, Vol. 122, No. 1, pp. 211-218
C24。SUCIU, T.IWATSUBO, M.D.PASCOVICI, 「Analysis
of a Torsional Fluid Film Vibrator」, Trans. ASME, Journal of Tribology, 2002.7, Vol. 124, No. 3,
pp. 480-485
C25。SUCIU, T.IWATSUBO, S.DEKI, 「Investigation
of a Colloidal Damper」, ELSEVIER, Academic Press, Journal of Colloid and Interface Science,
2003.4, Vol. 259, pp. 62-80
C26。SUCIU, T.IWATSUBO, S.DEKI, 「Novel
Principle of Mechanical Energy Dissipation. Part 1 – Static Performances of Colloidal Damper」, JSME International
Journal, 2004.1, Series C, Vol. 47, No. 1, pp. 180-188
C27。SUCIU, T.IWATSUBO, 「Novel Principle of Mechanical
Energy Dissipation. Part 2 –
Dynamic Performances of Colloidal Damper」, JSME International Journal, 2004.1,
Series C, Vol. 47, No. 1, pp. 189-198
C28。SUCIU,
T.IWATSUBO, K.YAGUCHI, M.IKENAGA, 「Novel and Global Approach of the Complex and Interconnected
Phenomena Related to the Contact Line Movement Past a Solid Surface from
Hydrophobized Silica Gel」, ELSEVIER, Academic Press, Journal of Colloid and Interface Science, 2005.3,
Vol. 283, pp. 196-214
C29。SUCIU, 「Molecular Dynamics Study
of Wetting on Brushlike Nanopillar and Wavelike Nanorough Surfaces」, ASME, MNC2007-21210, 2007.1, pp.1027-1034 (ISBN 0-7918-3794-7)
C30。T.IWATSUBO, SUCIU, M.IKENAGA, K.YAGUCHI,
「Dynamic Characteristics of
a New Damping Element Based on Surface Extension Principle in Nanopore」, ELSEVIER, Journal of Sound and Vibration, 308, 2007.6, pp. 579-590
DOI: 10.1016/j.jsv.2007.06.012
C31。SUCIU, 「Experimental Investigations on the Nano-Damping
Durability」,
ASME, MicroNano2008-70018, 2008.6, pp. 7-15 (ISBN
0-7918-3819-6)
C32。SUCIU, 「Thermal Effects on Nano-
Energy Absorption Systems (Nano-EAS)」,
ASME, MicroNano2008-70039, 2008.6, pp. 23-32 (ISBN 0-7918-3819-6)
C33。SUCIU, 「Energy Dissipation during
Liquid Adsorption/Desorption in/from Liquid-Repellent Nanochannels」, ASME, ICNMM2008-62040, 2008.6, pp. 755-764 (ISBN 0-7918-3826-9)
C34。H.GOTO,
SUCIU, T.INOKUCHI, 「Friction and Wear Properties of Aluminum-Silicon Alloy Impregnated
Graphite Composite (ALGR-MMC) under Lubricated Sliding Conditions」,
Taylor & Francis, Tribology
Transactions, Vol. 52, Issue 3, 2009.5, pp. 331-345
DOI: 10.1080/10402000802475353
C35。SUCIU,
K.YAGUCHI, 「Endurance Tests
on a Colloidal Damper Destined to Vehicle Suspension」,
Springer, Experimental Mechanics (An International Journal), Vol. 49, No. 3,
2009.6, 383-393 DOI: 10.1007/s11340-008-9163-z
C36。H.GOTO,
Y.AMAMOTO, SUCIU, 「Investigations on the Mechanism of Quasi-mild Wear for Carbon Steel
in Dry Sliding Contact with itself under Variable Loading, and Endurance of the
Worn Surfaces」, Elsevier, Wear, Vol. 267, 2009.6,
pp. 505-514 DOI: 10.1016/j.wear.2008.12.067
C37。SUCIU, 「Entropy-Based Design of
Liquid-Repellent Nanochannels Destined to Energy Absorption Systems (EAS)」, ASME, ICNMM2009-82005, 2009.6, pp. 755-764
(ISBN 978-0-7918-3850-1)
C38。H.GOTO,
SUCIU, 「Tribological Characteristics
of the Aluminum-Silicon Alloy Impregnated Graphite Composite under
Insufficiently Lubricated Reciprocating Sliding Conditions」, ASME/STLE IJTC2009-15061, 2009.10, pp. 71-73 (ISBN
978-0-7918-4895-1)
C39。SUCIU, H.GOTO, 「Interconnection between
the Contact Angle (Adhesion) Hysteresis, Slippage on a Nanorough Solid Wall and
Phononic Friction」, Elsevier, Tribology
International, Vol. 43, Issues 5-6, 2010.5-6, pp. 1091-1098 DOI: 10.1016/j.triboint.2009.12.046
C40。SUCIU, S.TANI,
K.MIYOSHI, 「Experimental
Study on the Thermal Characteristics of a Colloidal Damper」, JSME, Series C, Vol. 76, No. 765, 2010.5, pp. 19-25 (in Japanese)
DOI: 10.1299/kikaic.76.1043
C41。SUCIU, S.TANI,
K.YAGUCHI, 「On the
Fatigue Fracture at Adsorption/Desorption of Water in/from Liquid-Repellent
Nanoporous Silica」, Springer, ACTA MECHANICA, Vol. 214, Issue 1, 2010.6, pp. 195-203 DOI: 10.1007/s00707-010-0306-9
C42。T.UCHIDA,
SUCIU, H.GOTO, 「Influence
of the Lubricating Grease on the Properties of Fretting Friction and Wear of an
Applicative Metallic Material」, JSME, Series A,
Vol. 76, No. 766, 2010.6, pp. 61-63 (in Japanese) DOI: 10.1299/kikaia.76.711
C43。SUCIU,
Y.KIMURA, S.TANI, 「On the Generated Heat at Advancing/Receding of Water on Surface
Engineered Nanoporous Silica」, Trans Tech
Publications, Advanced Materials Research, Vol. 123-125, 2010.7, pp. 1003-1006
DOI: 10.4028/www.scientific.net/AMR.123-125.1003
C44。SUCIU, 「Investigations on a Smart
Nano- Energy Absorption System」, Trans Tech
Publications, Advanced Materials Research, Vol. 123-125, 2010.7, pp. 987-990
DOI: 10.4028/www.scientific.net/AMR.123-125.987
C45。SUCIU, S.TANI,
K.MIYOSHI, 「Experimental
Study on the Thermal Characteristics of a Colloidal Damper」, JSME, Journal of System Design and Dynamics, Vol. 4, No. 6,
2010.12, pp. 899-913 DOI: 10.1299/jsdd.4.899 & JOI:
JST.JSTAGE/jsdd/4.899
C46。SUCIU, H.GOTO,
N.GOUYA, 「Molecular
Dynamics Simulation of Wetting on Wavelike Nanorough Surfaces」, Tribology Online, Vol. 6, No. 1, 2011.1, pp. 19-25 DOI: 10.2474/trol.6.19
C47。SUCIU, H.GOTO,
H.ABIRU, 「Modeling
and Simulation of a Screw-Worm Gear Mechanical Transmission to Achieve its
Optimal Design under Imposed Constraints」, Journal
of Algorithms and Computational Technology, Vol. 5, No. 2, 2011.3, pp. 363-382
DOI: 10.1260/1748-3018.5.2.363
C48。SUCIU,
T.UCHIDA, H.GOTO, 「Influence
of Environmental Humidity on the Fretting Properties of an Applicative Metallic
Material under Grease Lubrication (An approach based on the slip index)」, JSME, Series A, Vol. 77, No. 777, 2011.5, pp. 25-29 (in Japanese)
DOI: 10.1299/kikaia.77.703
C49。SUCIU, T.TOBIISHI, R.MOURI, 「Modeling and Simulation of a Vehicle Suspension with Variable
Damping versus the Excitation Frequency」, Journal
of Telecommunications and Information Technology, No. 1/2012, MS-71512, 2012.4,
pp. 83-89
C50。SUCIU, T.TOBIISHI, 「Comfortableness Evaluation of an Autovehicle Equipped
with Colloidal Suspensions」, JSME, Series C, Vol. 78,
No. 789, 2012.5, pp. 74-83 (1378-1387) (in Japanese) DOI: 10.1299/kikaic.78.1378
C51。SUCIU, Y.KIMURA, 「Experimental
Study on the Forced Heating and Natural Cooling of a Colloidal Damper」, JSME, Series C, Vol. 78, No.
789, 2012.5, pp. 34-47 (1338-1351) (in Japanese)
DOI: 10.1299/kikaic.78.1338
C52。SUCIU, Y.KIMURA, 「Experimental
Study on the Forced Heating and Natural Cooling of a Colloidal Damper」, JSME, Journal of System Design and Dynamics, Vol. 6, No. 5, 2012.12, pp. 538-554 DOI:
10.1299/jsdd.6.538
C53。SUCIU, T.TOBIISHI, 「Comfortableness Evaluation of an Autovehicle Equipped with Colloidal
Suspensions」, JSME, Journal of System Design and
Dynamics, Vol. 6, No. 5, 2012.12, pp. 555-567
DOI: 10.1299/jsdd.6.555
C54。SUCIU, T.UCHIDA, H.GOTO, 「On the Necessary but Sufficient Amount of Grease to Obtain Fully
Lubricated Fretting Regime in Moist Air for SUJ2 Bearing Steel against S15C
Carbon Steel」, Tribology Online, Vol. 8, No. 1,
2013.1, pp. 28-37 DOI: 10.2474/trol.8.28
C55。SUCIU, S.FUKUI, 「Rheological
Model for a Nanoporous-Elasto-Hydrodynamic Composite Material」, Trans Tech Publications, Advanced Materials Science and Technology,
Vol. 750, 2013.3, pp. 100-103 DOI: 10.4028/www.scientific.net/MSF.750.100